Color & Customizations

April 21, 2025

Customized Anti-Slip Products

Safeguard Anti-Slip products are endlessly customizable. Request a consultation with one of our anti-slip experts to discuss:

Color Matching Capabilities
Custom Messaging
Logo Incorporation

Standard Colors

The samples on this web page serve only as a visual guide for initial selection of color. Actual finished product color may vary slightly from the version shown on your monitor based on grit size (coarseness) as well as the base material of construction.

For an accurate depiction, please Request a Sample

HiGlo-Traction®

Our glow-in-the-dark products use an embedded inorganic photoluminescent pigment that creates a green/yellow glow when active. The pigment is non-toxic, non-radioactive, and can be recharged repeatedly during the life of the product. HiGlo-Traction Covers are an effective safety solution for both outdoor and indoor applications, with “Glow-in-the-Dark” visibility for many hours after the light source has been removed. The photoluminescent pigment is fully recharged after 5 minutes of exposure to sunlight, 8 minutes at dusk, or 10 minutes in fluorescent light. As expected, the degree of brightness depends on the strength and nature of the light source. The higher the UV output, the brighter the illumination. Sodium vapor and red light yield no activation.

For an accurate depiction, please Request a Sample

Premium Colors

Safeguard premium colors offer a contemporary color palette for non-industrial applications. These designer colors fit the aesthetic requirements for anti-slip protection at schools, commercial offices, institutional buildings, hotels and personal residences.

For an accurate depiction, please Request a Sample

Two-Tone Color Configurations

Safeguard colors can be combined to create a two-tone configuration.

Contrasting color:

on the nosing and vertical lip of a Step Cover, calls attention to the leading edge of a stair.
on the perimeter of a Walkway Cover designates a change in surface texture and signifies a safe walk zone.
can also be configured on Ladder Rung Covers and is standard on all Pipe and Cable Covers.

Save money with solid colors and glow-in-the-dark edging or nosing

An economical alternative to full photoluminescent covers is combining with a solid color. Not only do you have a two-tone configuration in the light, but also the benefit of glow in the dark when the light source is removed.

Descriptive Marking

Reinforce Your Corporate Safety Message and PPE Requirement

Overhead safety warnings and signage can actually create a slip, trip and fall situation when the person fails to look down while walking. Worse yet, in the event of a fire or emergency, smoke and darkness often conceal overhead signage and directional guidance.

The image or message is embedded into the cover, not just printed on the surface, so it will last for the life of the product and not wear off.

Critical Safety Message

Commonly used phrases include:

Use Handrail
Use Trailing Hand Technique
Danger Zone
Watch Your Head

Personal Protective Equipment (PPE) Safety Symbol

Incorporating PPE Safety Symbols that are visible at floor level greatly increases the exposure of important safety warnings and messages. As workers and pedestrians look down while walking on hazardous areas or steps, these symbols act as a simple reminder to act and think safely. Combine with a glow-in-the-dark background for visibility after dark, during power outages, and emergency evacuations.

Custom Logos

We can incorporate your company logo and other custom graphics into Safeguard covers. Descriptive and informational markings do not affect the slip prevention performance of Safeguard covers. Contact us today to learn more about customizing your anti-slip covers.

Back to blog